Good morning

Indus Robotics

Robotics Technology Category

Control Systems

The logic that turns commands into coordinated motion.

Control systems close the loop between intent and movement. A command is issued, the controller plans the motion, drives deliver current to the motors, sensors report actual position and load, and the controller corrects continuously: command, control, motion, feedback, correction. Robot controllers, motion controllers, servo drives, PLCs, and feedback devices each own part of that loop, and they must share a common communication architecture to work as one machine.

Configured Families

Control Systems Product Families

Select a specialized technology family to inspect mechanical sizing, CAD geometries, and technical parameters.

Robot Controllers

Central kinematic processing units executing real-time multi-joint trajectories.

Real-Time KernelIntegrated SafetyTeach Pendant Interface

Motion Controllers

Deterministic controllers synchronizing up to 64 axes over EtherCAT fieldbuses.

Sub-Microsecond JitterElectronic CammingS-Curve Profiling

Servo Drives

Compact digital servo amplifiers with field-oriented control and safe torque off.

High BandwidthMulti-Feedback InputSTO SIL 3 Certified

PLC & Automation

Modular IEC 61131-3 logic controllers for overall cell sequencing and plant I/O.

Modular I/O ExpansionOPC UA ServerPROFINET / EtherNet/IP

Sensors & Feedback

Absolute optical encoders and multi-axis force-torque transducers.

26-bit ResolutionBiSS-C ProtocolNon-Volatile Memory

Engineering Criteria

Key Selection Factors for Control Systems

Specifying the appropriate drivetrain components requires holistic evaluation of peak dynamic loads, thermal duty cycles, stiffness constraints, and fieldbus communication latencies.

  • Number of coordinated axes and dynamic interpolation requirements
  • Fieldbus protocol support (EtherCAT, PROFINET IRT, EtherNet/IP, CANopen)
  • Control loop rates (current loop at 32 kHz, position loop at 4 kHz)
  • Feedback sensor compatibility (BiSS-C, EnDat 2.2, SSI, resolver, incremental)
  • Integrated functional safety (STO, SS1, SLS compliant with SIL 3 / PLe)

Primary Industrial Applications

  • Automotive
  • Electronics
  • Manufacturing
  • Logistics
  • Inspection

System Integration Considerations

  • •Number of axes, and whether they must be synchronised
  • •Control loop rates and the determinism your process requires
  • •Feedback resolution and where it is measured in the drivetrain
  • •Communication protocol compatibility across the machine
  • •Diagnostics, data access, and long-term maintainability

Downloads & Documentation

Technical Resources for Control Systems

INDUS Master Robotics Product Catalogue

catalogue · PDF

Integrated Servo Actuator Engineering Datasheet

datasheet · PDF

Linear Positioning Actuator Technical Datasheet

datasheet · PDF

Need assistance sizing Control Systems?

Our application engineers can verify inertia ratios, motor torque curves, and duty cycle thermals for your project.